SFS 52 B2
GB
│
IE
│
NI
│
CY
│
17 ■
Troubleshooting
There is no ring when pressing the ringer
button
♦ Check whether there is a battery (type CR2032)
in the transmitter.
♦ Check whether the power outlet being used for
the receiver is working properly.
♦ It is possible that the transmitter is not synchro-
nised with the receiver. Repeat the synchronisa-
tion.
♦ Ensure that the signal type switch is set to the
position
or .
The range is reduced
♦ A weak battery will reduce the range. Change
the battery every 12–18 months.
♦ Metal constructions, walls, ceilings or other ap-
pliances that use the same frequency can affect
the range. Try to avoid mounting the transmitter
in the immediate vicinity of any metal parts.
NOTE
► If you cannot solve the problem with the
above-mentioned solutions, please contact the
Service Hotline (see chapter entitled Service).
To Next Page
Loading...
