Silvercrest SGT 10.6 A1 - Step 2: Installing the Graphics Tablet Driver and Macro Key Manager

SilverCrest graphics tablet SGT 10.6 A1
English - 111
Step 2: Installing the graphics tablet driver and Macro Key Manager
Windows
®
XP requires a driver to recognise the graphics tablet.
If you are using Windows Vista
®
Home Premium or Windows
®
7, it is normal-
ly not necessary to install a graphics tablet driver, as this is already included
in the operating system. However, we recommend installing the driver so
that you can:
 obtain a higher graphics tablet resolution
 install the Macro Key Manager which you can use to program the 26
macro keys.
To install the driver, proceed as follows:
1. Place the driver CD in your CD drive.
The installation wizard normally starts automatically. If it does not start
automatically, proceed as follows:
 Open the Explorer (right-click on [Start]  "Explorer" menu).
 Click the icon of your CD or DVD drive in My Computer.
 Start installation by double-clicking the "setup" file.
The installation dialogue box opens:
[Macro Key Manager (32 & 64 bit)]: Install the graphics tablet driver and
Macro Key Manager on a 32- or 64 bit operating system.
[Free Notes / Office Ink (32 & 64 bit)]: see page 114.
[Exit]: Terminate/cancel installation.