Silvercrest SHE 3 E1 - Before Use; Inserting; Replacing Batteries; Operation

16 GB/CY
 Before use
 Only use the product with dry hands.
 Remove all parts from the package.
 Inserting/ replacing batteries
 Switching off the product: Slide down the slide switch
3
to the
“0” position.
 Put the protective lid
9
on the roller
1
/
8
. Hold the main
housing
5
firmly. Slide the battery compartment cover
6
off
the main housing.
 Remove the used batteries, if present.
 Insert 2 new batteries (type AA, LR6) into the battery
compartment
11
.
 Pay attention to the correct polarity. This is indicated on the front
side of the battery compartment
11
.
 Slide the battery compartment cover
6
back onto the main
housing
5
.
 Operation
 Switching on the product: Press the safety button
4
.
Simultaneously, slide up the slide switch
3
to the required speed
level.
 Note: We recommend that you start working at speed level “I”.
If the results are satisfactory – and you feel comfortable handling
the product – then you may switch up to speed level “II”.
 Apply the roller
1
/
8
slowly and carefully with only a little
pressure to the callus, which is to be removed.