18 GB/CY
Press and hold the release button for the roller holder
7
again.
Simultaneously, place the other roller holder
2
with roller
8
/
1
on top of the product in such a way that the gear of the roller
holder
2
and the product are above one another.
Make sure that all parts are completely attached before releasing
the release button for the roller holder
7
.
Skin care after application
Apply body lotion, oil or cream to the skin.
Do not apply any substances (e.g. deodorant) to the treated
areas, which could irritate the skin.
Cleaning and care
Roller holder
2
and the roller
1
/
8
:
Note: Clean the roller holder
2
and the roller
1
/
8
after every
application. Check whether the surface of the roller
1
/
8
is undamaged. To do so, turn the roller and check the surface
carefully.
Note: Switch off the product before cleaning and care.
Switch off the product (see section “Inserting/ replacing
batteries”).
Clean the roller holder
2
and the rollers
1
/
8
with the
cleaning brush
10
after every application.
Place the protective lid
9
on the roller holder
2
.
Wipe down other parts with a damp cloth, when necessary.
To Next Page
Loading...
