Silvercrest SHLF 2000 E4 - Page 7

GB/IE/NI/CY/MT 7
Remote control (only for use with fan heater
SHLF 2000 E4)
Battery supply: 3 V (direct current)
CR2025
: Lithium battery
Information requirements for electric local
space heaters
Model identifier(s): SHLF 2000 E4
Item Symbol Value Unit
Heat output
Nominal heat output P
nom
1.8-2.0 kW
Minimum heat
output (indicative)
P
min
0.9 kW
Maximum continuous
heat output
P
max,c
2.0 kW
Auxiliary electricity consumption
At nominal heat output el
max
0 kW
At minimum heat output el
min
0 kW
In standby mode el
SB
0.00032 kW
Item Unit
Type of heat input, for electric storage local
space heaters only (select one)
manual heat charge control, with
integrated thermostat [no]
manual heat charge control with room
and/or outdoor temperature feedback [no]
electronic heat charge control with room
and/or outdoor temperature feedback [no]
fan assisted heat output [no]
Type of heat output/room temperature
control (select one)
single stage heat output and no room
temperature control [no]
Two or more manual stages, no room
temperature control [no]
with mechanic thermostat room
temperature control [no]
with electronic room temperature control [no]
electronic room temperature control
plus day timer [yes]
electronic room temperature control
plus week timer [no]
Other control options
(multiple selections possible)
room temperature control,
with presence detection [no]
room temperature control,
with open window detection [no]
with distance control option [no]
with adaptive start control [no]
with working time limitation [yes]
with black bulb sensor [no]
ROWI Germany GmbH
Werner-von-Siemens-Str. 27
76694 Forst
GERMANY