To Next PageTo Next PageHow to fix Silvercrest SWW 1500 A1 that won't turn on?
If your Silvercrest Heater will not switch on, make sure the mains plug is fully inserted into the mains power socket. Also, check the house fuses to ensure the mains power socket is providing power.
Why is my Silvercrest SWW 1500 A1 Heater not providing heat?
If your Silvercrest Heater is not providing heat, first ensure that the main switch is on. Then, activate the POWER/MODE button. If it still does not work, contact customer service, because the heating element may be defective.
What to do if Silvercrest Heater shows indicator after temperature sensor malfunction?
If the Silvercrest Heater displays an indicator due to a malfunction of the integrated temperature sensor, try switching the device off and on again using the main switch. If the indicator continues to appear, get in touch with the customer service department.
General| Brand | Silvercrest |
|---|---|
| Model | SWW 1500 A1 |
| Category | Heater |
| Language | English |
Explains the purpose and intended use of the operating instructions.
States copyright protection and outlines limited liability for damages.
Defines the warning levels (DANGER, WARNING, CAUTION, NOTICE) and their implications for safety.
Specifies the device is for indoor heating in living spaces and for private purposes only.
Introduces safety information and warns about potentially fatal electrical current risks.
Provides essential safety information for handling the device, including checks, repairs, and environmental considerations.
Lists standard delivery components and advises checking for damage or missing items upon receipt.
Recommends recycling packaging materials and retaining original packaging for potential warranty claims.
Details criteria for the setup location, including orientation, floor surface, distances, and environment.
Alerts to fire risk and notes potential initial odor upon first use.
Advises on electrical connection safety and installing batteries in the remote control.
Lists and identifies the operating components of both the device and its remote control.
Explains stationary assembly and provides warnings for wall mounting preparation.
Details attaching wall brackets, marking drill holes, and drilling according to specified dimensions.
Describes inserting rawlplugs, screws, hanging the device, and marking for the angle bracket.
Explains how to switch the device on/off and select heating modes (Low/High).
Guides on setting the desired temperature and how the device maintains it.
Explains how to set automatic switch-off and switch-on timers for the device.
Details the device's safety features including overheating, frost, and topple protection mechanisms.
Provides instructions for cleaning, storage, and proper disposal of the device and batteries.
A table listing common defects, their causes, and solutions for troubleshooting.
Lists technical details such as voltage, power consumption, dimensions, and weight.
States compliance with relevant EU directives for low voltage and electromagnetic compatibility.
Outlines warranty terms, exclusions, and provides customer service contact details.
Lists the importer's company name and address.
