9
Assembly
SWW 1500 A1
GB
IE
Assembly
CAUTION
For assembly place the device on a soft underlay such as, for example, ►
a carpet in order to avoid damages.
Stationary assembly
Fold the carrying handle ♦
10
backwards and place the device with the
underside upwards, on a soft underlay.
Assemble the pedestals ♦
8
with both screws
A
to the device (see diagram
Pedestal assembly).
10
A
8
Diagram Pedestal assembly
Wall mounting
WARNING
Make sure that when you are drilling you do not damage any electrical ►
wires or other installations in the wall such as water pipes.
The supplied rawlplugs ar
e only suitable for a mounting on concrete or ►
stone. Before starting the installation, please check your installation location
carefully for its suitability for the rawlplugs. If in doubt, call a professional.
NOTICE
When selecting the mounting location make sure that a suitable mains wall ►
socket is located within the plug-in radius of the mains power cord.
To Next Page
Loading...
