What to do if my Silvercrest SKD 2300 A1 cannot be switched on?
If your Silvercrest Heater won't switch on, first, try another wall socket as the current one may be faulty. If it still doesn't work, the appliance might be faulty and should be inspected by a specialist workshop or disposed of properly.
What to do if my Silvercrest SKD 2300 A1 Heater only produces cold air?
If your Silvercrest Heater is only producing cold air, it could be that the selected temperature has already been reached. The appliance will switch on again automatically once the room temperature falls. Alternatively, try selecting a higher desired temperature.
How to fix a Silvercrest Heater that won't turn on?
If your Silvercrest Heater cannot be switched on, first check the wall socket and fuse. Try another wall socket. If that doesn't work, the appliance may be faulty and should be inspected by a specialist workshop, or disposed of properly.
Why does my Silvercrest SKD 2300 A1 switch off automatically?
Your Silvercrest Heater might be switching off automatically because the thermal cut-out has been triggered. Allow the appliance to cool down. Also, try cleaning the appliance.
How to fix a Silvercrest Heater that only produces cold air?
If your Silvercrest Heater is only producing cold air, it could be that the selected temperature has been reached; the appliance will switch on again automatically when the room temperature falls. Alternatively, try selecting a higher desired temperature.
How to fix a Silvercrest SKD 2300 A1 Heater that cannot be switched on?
If your Silvercrest Heater cannot be switched on, the issue might be a faulty fuse or wall socket. Try selecting another wall socket. If that doesn't work, the appliance might be faulty, and you should have it repaired at a specialist workshop or dispose of it.
How to fix Silvercrest SKD 2300 A1 that produces only cold air?
If your Silvercrest Heater is only producing cold air, it could be that the selected temperature has been reached; the appliance will switch on again automatically as soon as the room temperature falls. Alternatively, try selecting a higher desired temperature.
What to do if my Silvercrest Heater is blowing cold air?
If your Silvercrest Heater only produces cold air, it might be because the selected temperature has been reached. The appliance will automatically switch on again once the room temperature drops. Alternatively, try selecting a higher desired temperature.
Why does my Silvercrest Heater keep turning off?
If your Silvercrest Heater switches off automatically, the thermal cut-out may have been triggered. Allow the appliance to cool down. Also, make sure to clean the appliance.
Describes the appliance's intended use as a floor-standing convector heater for private and limited commercial use.
Lists all items included in the product package, such as the heater, remote control, batteries, and feet.
Defines signalling terms like Warning!, Caution!, and Note used in the instructions.
Provides critical safety advice for children, handling, cleaning, and placement to prevent injury.
Step-by-step guide on how to attach the feet to the convector heater before use.
Instructions for placing the appliance in a suitable location and connecting it to the power supply.
Details the process of inserting new batteries into the remote control, including polarity and compartment closing.
Guides on initial power-up, switching on the appliance, and basic operation readiness.
Explains how to set the desired temperature and displays for actual and set temperatures in °C or °F.
Describes the three available heat settings (1000W, 1300W, 2300W) and fan operation.
Details how to use the timer function to set automatic shut-off between 1 and 15 hours.
Provides instructions for disposing of the appliance according to EU regulations for electrical devices.
Guides on the proper disposal of batteries, warning about harmful substances and collection points.
Contact details for the service center in Great Britain, including phone number and email.
Contact details for the service center in Ireland, including phone number and email.
Contact details for the service center in Cyprus, including phone number and email.
Contact details for the service center in Malta, including phone number and email.
Article number for the product, useful for inquiries and service requests.
Information about the supplier HOYER Handel GmbH, including address.
General| Brand | Silvercrest |
|---|---|
| Model | SKD 2300 A1 |
| Category | Heater |
| Language | English |
To Next Page