6
SHSS 12 B2
GB
IE
Before fi rst use
NOTE
►
This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the fi rst use.
■ Remove all packaging materials as well as foils
and stickers
Charging the appliance
NOTE
►
Ensure that the appliance is switched off
before starting to charge the batteries.
■ To charge the appliance, connect the charger i
to a mains socket and insert the barrel jack o
into the charging socket s on the cradle d.
Feed the cable through the cable channel on the
charging socket s, so that the cradle d is not
resting on the cable.
■ Place the handle with the attached hand element
4 onto the cradle d.
The red control lamp 3 illuminates.
When the appliance is fully charged, the indicator
light 3 illuminates green.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
Fig. 1 Fig. 2
■ To connect the hand element 4 to the handle,
push the tip of the hand element 4 into the
opening in the hand element recess e.
■ Then press the grip 1 of the hand element 4
into the handle so that the hand element 4
clicks fi rmly into position (Fig. 1).
■ To remove the hand element 4 from the handle,
press the "Hand element" release w.
■ Then pull the hand element 4 upwards and
forwards out of the hand element recess e
(Fig. 2).
To Next Page
Loading...
