16
GB
1. If necessary, switch off the noise cancellation
using the ON/OFF|17 button (to OFF).
2. Insert the larger plug of the USB charger ca-
ble|14 into a USB port with power supply such
as a computer, laptop or a USB power adapter
corresponding to the specifications on the rat-
ing plate of the in-ear headphones.
3. Insert the small plug of the USB charger ca-
ble|14 into the micro USB port|15.
The LED|16...
… is lit red while the device is being charged.
… goes out when the battery is fully charged.
… is lit yellow when the noise cancellation is
switched on during the charging process.
__293091_In_Ear_Kopfh_B6.book Seite 16 Donnerstag, 26. Oktober 2017 8:30 20
To Next Page
Loading...
