B
Brian MooreAug 7, 2025
Why is there no sound from my Silvercrest SKHK 40 C1 Headphone?
- JJacob AllenAug 7, 2025
If there is no sound from your Silvercrest Headphone, several factors could be the cause: * The headphones might not be switched on. Press the button 5 for about 2 seconds to switch them on. * The volume could be set to minimum. Adjust the volume using the button 4. Also, check the volume on the playback device. * The playback device might not be switched on. Ensure it is powered on. * The playback device might be muted. Unmute it. * In AUX-IN mode, the audio cable might be incorrectly connected. Ensure the audio cable is correctly connected to the AUX IN socket 8 of the headphones and the playback device.














