Silvercrest SKHK 40 C1 - Troubleshooting Guide; Fault Causes and Remedies

■ 16
│
GB
│
IE
SKHK 40 C1
Disposal of the packaging
The packaging materials have been selected for their environmental
friendliness and ease of disposal and are therefore recyclable.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging
material components for disposal if necessary. The packaging
material is labelled with abbreviations (a) and numbers (b) with the
following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
Troubleshooting
Fault causes and remedies
If you cannot connect the headphones to a Bluetooth
®
-compatible playback
device, proceed as follows:
♦ Make sure that the Bluetooth
®
function is activated on the playback
device.
♦ Make sure that the audio cable e is connected to the AUX IN socket8
of the headphones. When an audio cable e is connected, the
Bluetooth
®
function of the headphones is deactivated.
♦ Check that the headphones are switched on.
♦ If you use several Bluetooth
®
playback devices, ensure that any
previous connection is disconnected. There may be a previously paired
playback device still within range.
♦ Make sure that the headphones are no more than 10 metres from the
playback device and that no obstacles or electronic devices are placed
between them.
NOTE
► In an environment with high-frequency interference, you may experience
noise interference during music playback via Bluetooth
®
. As soon as the
interference has ceased, music playback should automatically continue in
Bluetooth
®
mode without any further problems.