GB
│
IE
│
17 ■
SKHK 40 C1
The following table helps to identify and rectify further possible faults:
Fault Possible cause Remedy
The head-
phones cannot
be switched off.
The internal battery is
not charged.
Charge the battery (see section
Charging the internal battery).
No sound.
The headphones are
not switched on.
Press the button
5
for about
2 seconds to switch on the head-
phones.
The volume is set to
minimum.
Set the desired volume using the
button 4. If necessary,
also increase the volume on the
playback device.
The playback device is
not switched on.
Switch on the playback device.
The playback device
has been muted.
Unmute the playback device.
The audio cable
e is
incorrectly connected
in AUX-IN mode.
Make sure that the audio cable e
is correctly connected to the
AUX IN socket 8 of the head-
phones and the playback device.
Sound is only
coming from
one side of the
headphones.
The stereo balance
control on the
playback device is
incorrectly adjusted.
Adjust the stereo balance control to
the setting you desire.
NOTE
► If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service).
To Next Page
Loading...
