10
GB
6. Operation
6.1 Replacing the blade head
The device is supplied with two different blade heads:
• The trimmer head|1 is used with two different attachments for trim-
ming body hair to 3|mm (using the 3|mm attachment|10) or 0.5|mm
(using the 0.5|mm attachment|11).
• The shaver head|9 is used for smooth shaving of body hair.
1. Switch off the device with the on/off switch|3 if necessary.
2. Figure A: rotate the trimmer head|1 / shaver head|9 so that the ar-
row of the lock|2 points to the open lock symbol .
3. Remove the trimmer head|1 / shaver head|9.
4. Place the desired blade head (trimmer head|1 or shaver head|9) so
that the arrow points to the open lock symbol .
5. Rotate the blade head (1/9) so that the arrow points to the closed
lock symbol .
6.2 Changing attachments for the trimmer
head
WARNING! Risk of injury!
~ Never use the trimmer head|1 without attachment|10/11.
~ Do not use the device if parts are damaged.
•Use the 3|mm attachment|10 to trim hair to a length of 3|mm, or as
a preparation for longer hair (longer than 20mm).
•Using the 0.5|mm attachment|11, you achieve a hair length of ap-
prox. 0.5|mm.
1. Figure C: remove any attachment|10/11 currently in place by
gripping it from the sides and carefully pulling it off the trimmer
head|1.
__288903_Koerperhaartrimmer_B6.book Seite 10 Dienstag, 12. Dezember 2017 12:15 12
To Next Page
Loading...
