14
GB
Cleaning the shaver head
WARNING! Risk of material damage!
~ Do not apply excessive pressure on the shaving foil|6 of the shaver
head|9. It is thin and can easily be damaged.
~ Only use the cleaning brush for cleaning the cutter block. Under no
circumstances should it be used to clean the shaving foil|6. Bristles
could get caught in the shaving foil and damage it.
1. Switch off the device with the on/off switch|3 if necessary.
2. Figure F: press both release buttons|8 and carefully take off the
shaving foil frame|7.
3. Tap the shaving foil frame|7 carefully.
4. Clean the cutter block|13 using the cleaning brush supplied.
5. Rinse the cutter block|13 and the shaving foil frame|7 under clean
running water.
6. Allow all parts to dry completely before reassembling them and put-
ting them away.
NOTE: It is not necessary to oil the shaver head|9.
__288903_Koerperhaartrimmer_B6.book Seite 14 Dienstag, 12. Dezember 2017 12:15 12
To Next Page
Loading...
Need help?
General
