SKMH 1100 A1 17
8.2 Steaming using the steamer baskets
1. Stand the blender jug 6 in the base 17.
2. Pour 1000 ml water into blender jug 6.
This corresponds to the second lowest
marking “I”.
3. Check that the seal 5 is properly seated
in the drip tray 4.
Note: The seal 5 for the drip tray 4
must me mounted in such a way that the
label “BACK” is no longer visible.
4. Place the drip tray 4 on the blender
jug 6 at a slight angle.
5. Rotate the drip tray 4 until it audibly
clicks into place.
The appliance can be started only if the
drip tray 4 is correctly positioned.
6. Place the ingredients in the steamer
baskets 3 and 2.
Note: Even if you need only the
shallow basket 2 you must always use
them both, 3 and 2, to prevent steam
from escaping to the side.
7. Place the filled steamer baskets 3/2 in
the drip tray 4.
8. Cover each steamer basket with the
corresponding lid 1.
9. Set the desired time.
10.Turn the temperature control 13 to the
right until the display 8 shows “SF”
(“extra steam”).
I
RP93471 Küchenmaschine mit Heizung LB6 Seite 17 Donnerstag, 14. August 2014 3:38 15
To Next Page
Loading...
