15
GB
9.5 Operating the buttons
Illumination/Flashing of
the button(s)
Situation Function of the button
START/STOP19 flashes.
Settings were performed,
and a cycle can be started.
Press the button to start a cy-
cle.
START/STOP19 lights up.
The cycle is in operation. Press the button to stop a cy-
cle.
TURBO20 lit white.
Turbo function can be acti-
vated.
Keep the button pressed as
long as the function is need-
ed.
TURBO20 lit red.
The function is blocked (e.g.
because the food tempera-
ture inside the blender jug
exceeds 60 °C).
The button is blocked.
Program button ( 24,
23, 22) lights
up and START/STOP19
flashes.
The programme is selected
but not yet started.
Press START/STOP19 to
start the function.
Program button ( 24,
23, 22) lights
up and START/STOP19
lights up.
The programme is selected
and started.
In order to abort the pro-
gramme early, press
START/STOP19.
Program button 23
flashes and START/
STOP19 lights up.
The programme is selected
and started. However, the
heat-up time of 10 minutes is
still ongoing.
The programme starts auto-
matically.
- The timer26 can be
used to change the pre-
set time.
- In order to start the pro-
gramme before the
10minutes e
xpired,
press 23.
25 lights up.
The scale is activated. In order to set the weight in-
dicator to 0, press 25.
__317553_MC_plus_GR_CY.book Seite 15 Freitag, 12. April 2019 10:00 10
To Next Page
Loading...
