48
Table for the TP Index
No. Sub-menu Description
1 Add Create new frequency (transponder):
Menu item "TP frequency": Frequency:
set desired frequency
Menu item "Symbol rate": set
corresponding symbol rate
Menu item Polarity: set corresponding
polarisation
The new frequency (transponder) is
created after execution.
When exiting the menu confirm the safety
message by pressing the OK key. Only
after confirmation the new frequency will
be created.
For scanning the newly created
frequency, initiate the menu item "Scan".
2 Delete Delete the selected transponder. When
confirming the safety message, the
transponder and all channels on it will be
deleted.
3 Del(ete) all When confirming the safety message, all
transponders and all channels on them
will be deleted.
To Next Page
Loading...
