GB
│
IE
│
13 ■
SLS 2200 C2
Handling and operation
Switch the device on/off
Switching on
♦ Press the ON/OFF button
briefly to switch on the device.
The charge level LEDs
light up for about 10 seconds.
The
LED lights up blue as long as a connected device
is being charged.
Automatic switch-off
♦ If no device is connected for charging within 10 seconds, the
charger switches off automatically to conserve its battery.
Switching off
♦ Press and hold the ON/OFF button
for at least 3 seconds
to switch off the device and stop the charging process.
The
LED goes out.
Display charge level
♦ Press the ON/OFF button briefly to show the charge level
of the non-loaded battery for a few seconds. The charge level
LEDs
show you the charge level.
Charge level LEDs
Charge level
All LEDs are on 75 -100 %
Three LEDs are on 50 - 74 %
Two LEDs are on 25 - 49 %
One LED is on 5 - 24 %
One LED is flashing < 5 %
All LEDs off 0 %
To Next Page
Loading...
