6
SMUK 1500 A1
GB
Assembly and setting up
■ Place the appliance on a clean and level heat-
resistant surface.
■ Insert the inner bowl so that the 3 power con-
tacts on the base of the inner bowl connect
with the sockets in the base . Press the inner
bowl down carefully so that it sits firmly in
the base .
■ For steaming, insert the steamer grill into the
inner bowl so that it hangs within the inner
bowl :
■ For frying, you will need the frying basket
and the handle :
– Press the rods of the handle together so
that the holding pins can be inserted into the
eyelets on the frying basket :
– Loosen your grip on the pressed together rods
of the handle so that the rods move apart
and the holding pins project into the holes:
– The handle now sits firmly on the frying
basket .
■ Place the lid on the inner bowl .
■ Insert the plug into a mains power socket. The
indicator lamp lights up and the appliance
heats up to the defined temperature level.
■ Once the temperature level defined has been
reached, open the lid and place the frying
basket carefully onto the floor of the inner
bowl . The rods on the grab handle are
now positioned within the notches of the inner
bowl .
■ Now close the lid .
NOTE
If the lid is open, you can hang the frying
basket on the rim of the inner bowl using
the hook .
For instance, if the fried food is ready and the
excess fat is to be allowed to drain.
To Next Page
Loading...
