Silvercrest SRD 250 A1 - Alarm functions

14
SRD 250 A1
GB
IE
Handling and operation
Switching the alarm function on
Press briefl y the AL1 button ♦
16
and/or AL2 button
15
. In the dis-
play
2
a point appears to the left and/or to the right. The alarm
function is now activated.
Switching the alarm off
Whilst the alarm is sounding press the POWER/BAND button ♦
9
,
to switch the alarm off for 24 hours.
Switching the alarm function off
Press briefl y the AL1 button ♦
16
and/or AL2 button
15
. The alarm
indicators go out in the display
2
.
Snooze function (“SNOOZE” function)
Whilst the alarm is sounding press the SNOOZE button ♦ to tempo-
rarily switch off the alarm. After 6 minutes the alarm sounds again.
NOTICE
If the snooze function is activated the corresponding alarm ►
point blinks in the display
2
.
Automatic Switch-off (“SLEEP” function)
With the “Sleep” function the device switches itself off after a time
lapse of between 60 and 10 minutes.
Press the POWER/BAND button ♦
9
to switch the device on.
Press the SLEEP button ♦
14
. In the display
2
appears the switch off
time 60 minutes and the SLEEP-LED
6
lights up. Repeated press-
ing of the SLEEP button
14
shortens the switch off time by
10 minutes respectively.