Silvercrest SRR 3.7 A1 - Charging the batteries

SRR 3.7 A1
GB
│
9 ■
CAUTION – PROPERTY DAMAGE!
► Never operate the appliance unsupervised,
and only in accordance with the informa-
tion on the nameplate.
► Use only the supplied mains adapter (type
PTB-050100EU) to power your appliance.
► To avoid damage caused by overheating,
do not cover the mains power adapter.
Charging the batteries
The battery should be charged for at least 90 minutes before first use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connection plug ! into the charging socket3 on the
shaver.
Ensure the +/- terminals are correctly aligned: the guide rod
in the charging socket 3 must be in the guide groove on the
connection plug !. Otherwise the connection plug ! cannot
be plugged in.
2) Plug the mains adapter . into a mains socket that complies with
the appliance specifications. 
The battery charge level is shown in percent (%) on the display
(battery charge level indicator -). The

symbol appears
on the display.