Silvercrest SRR 3.7 A1 - Cleaning under running water

SRR 3.7 A1
■ 14
│
GB
Cleaning under running water
The shaver unit  is suitable for cleaning under running
water.
1) Press the release button  so that the shaver unit  pops open.
2) Hold the shaver unit  under the running water so that the water
flows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
Ensure that only the shaver unit  is under the stream of water!
The shaver handset is only protected against water splashes and
can be irreparably damaged if it is held under running water.
3) Allow the shaver unit  to dry before you use the shaver again.