Silvercrest SRR 3.7 D5 - Warranty Period and Statutory Claims; Scope of Rotary Shaver Warranty Coverage

SRR 3.7 D5
GB
│
IE
│
NI
│
17 ■
Thorough cleaning
For a thorough cleaning, remove the shaving heads 3:
1) Pull the cutting unit 2 off the handset and turn it around.
2) Press the two catches on one of the black shaving head fi xtures and,
at the same time, pull this up and out of the cutting unit 2. Proceed
in the same way with the other two shaving head fi xtures. You
can now disassemble all of the parts (blade, shaving head 3).
Shaving head
fi xture
Shaving
head 3
Blade
3) Clean all parts under running water and then allow them to dry
fully.
4) Replace the cutting unit 2. Ensure that all of the parts grip into
each other correctly:
IB_277761_SRR3.7D5_LB6_1.indb 17 15.06.16 11:15