EasyManua.ls Logo

Silvercrest SSKT 900 A1 - Keep Warm Function; Timer Function

Silvercrest SSKT 900 A1
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 
GB
IE
SSKT 900 A1
CAUTION
Damage to the appliance!
Do not use pointed or sharp objects to remove the cooked food.
These could damage the coating of the inner bowl i!
Remove the plug of the power cord a from the mains socket.
Remove the container for water condensation q downwards from its fi tting and
empty it. Then replace it.
Keep warm function
After cooking, the appliance switches automatically into the keep warm function.
The LED above the button lights up.
You can start the keep warm function even without a previous cooking programme:
Press the button to switch on the appliance. Then press the button. The
appliance starts the keep warm function. You can stop the keep warm function
at any time by pressing the button. The maximum time for the keep warm
function is 24 hours.
Timer function
CAUTION – PROPERTY DAMAGE
Never leave the appliance unattended while the pressure is building up or
during cooking!
If you want to delay the start of the desired cooking process by up to 24 hours,
press the button repeatedly before selecting the programme. Each press
delays the start by a further 30 minutes. The display shows the time until the
beginning of cooking and the LED above the lights up.
After selecting the required time delay, proceed with selecting the programme as
described in the section “Operation”.
IB_274422_SSKT900A1_IE.indb 18 14.01.16 17:35

Related product manuals