GB
│
IE
│
NI
│
CY
│
9 ■
SSMS 600 D4
NOTICE
► NEVER fill the bowl 8 BEYOND the MAX marking. Otherwise, the
appliance does not function optimally.
■ Place the bowl lid 6 onto the bowl 8 and turn it until tight. Thereby, the
lugs on the edge of the bowl 8 must be guided into the rail on the bowl
lid 6. Please ensure that the blade 7 is correctly engaged in the bowl lid 6.
■ Place the motor unit 4 on the bowl lid 6 so that the arrow points to the
symbol
. Turn the motor unit 4 until the arrow points to the symbol .
NOTICE
► Should you wish to keep foodstuffs in the bowl 8 you can remove the
base of the bowl 8 and use it as a lid. For this, carefully remove the bowl
lid 6 and motor unit 4 and, if needs be, the blade 7. Loosen the base of
the bowl 8 and then place it onto the bowl 8.
Holding the appliance
To operate the appliance, hold it as follows:
To Next Page
Loading...
