EasyManua.ls Logo

Silvercrest SSMW 750 D2 - Operation

Silvercrest SSMW 750 D2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 GB
Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames.
m
CAUTION! Hot
surface! During use the
product gets hot. Do not touch
the product while in use nor
immediately after use.
During use, care must be taken
as low heat may be generated
at the handle.
Operation
The product must not be
left unattended while it is
connected to the supply mains.
Do not move the product while
it is in operation.
Do not use the product without
an inserted set of plates.
Do not place the product on
hot plates (gas, electric, coal
cooking range etc.).
Operate the product on a
level, stable, clean, heat-
resistant and dry surface.
Do not cover the product while
it is in use or shortly after use,
when it is still hot.
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates.
The use of extension cords is
not recommended.
If the use of an extension
cord is necessary, it must be
designed for a current flow of
at least 10 A.
Lay cords in such a way that
they may not be tripped over
or otherwise damaged.
The product is not intended
to be operated by means of
an external timer or separate
remote-control system.

Table of Contents

Other manuals for Silvercrest SSMW 750 D2

Related product manuals