Silvercrest SSSES 1.5 B2 User Manual

GB
│
IE
│
NI
│
9 ■
SSSES 1.5 B2
Cleaning and maintenance
CAUTION! MATERIAL DAMAGE
► Do not use caustic, abrasive or solvent-based cleaning
materials. They can damage the surfaces of the appliance.
♦ Switch off the appliance by pressing the On/Off button
3
for approx. 5 seconds. The red LED 2 lights up for approx.
3 seconds.
♦ Wipe the appliance with a damp cloth. If required, use a mild
washing-up liquid on the cloth.
♦ If the sensor
6 is dirty, clean it carefully with a damp cloth.
♦ If you do not intend to use the appliance for a longer period
of time, clean the soap tank 8 in the following manner:
1. Remove the soap tank
8 from the main appliance 7.
2. Wash out the soap tank
8 with clean water to dispose
the remains of the soap inside.
3. Reattach the soap tank
8, which has been filled with a
small amount of clean water, to the main appliance 7
and switch on the appliance.
4. Activate the soap dispenser
5 a few times, so that both
the soap dispenser 5 and the connecting tubes inside
the main appliance 7 are rinsed out.
5. Remove the soap tank
8 from the main appliance7.
Empty the soap tank completely and leave to stand for a
short while with the soap tank latch 9 remaining open
to allow it to dry out in the open air.
Storage
CAUTION! MATERIAL DAMAGE
► Do not turn the appliance upside down when drying! If you
do, water may enter the appliance and damage it!
♦ Switch off the appliance by pressing the On/Off button
3 for approx. 5 seconds. The red LED 2 lights up for
approx. 3 seconds.
♦ Always clean the appliance thoroughly before storing.
♦ Remove the batteries from the main appliance
7.
♦ Store the appliance in a clean, dry location away from direct
sunlight.
IB_353244_SSSES1.5B2_LB6.indb 9 11.01.2021 14:48:52

Silvercrest SSSES 1.5 B2 Specifications

General

Brand	Silvercrest
Model	SSSES 1.5 B2
Category	Dispenser
Language	English