Silvercrest SSSES 1.5 B2 - Battery Insertion and Replacement

■ 6
│
GB
│
IE
│
NI
SSSES 1.5 B2
Inserting/replacing the batteries
CAUTION! MATERIAL DAMAGE
► Pay attention to the polarity indicated on the battery
compartment
r when you are inserting the batteries!.
► Always use batteries of type Micro AAA, LR03.
► Always use batteries of the same type.
1. Rotate the soap tank
8 anticlockwise to remove it from
the main appliance 7.
2. Turn the main appliance 7 upside down to access
the battery compartment latch e. Rotate the battery
compartment latch e anticlockwise towards open
until the battery compartment latch e can be removed
(see Fig. 1).
lock
open
lock
open
Fig. 1 Fig. 2
3. Remove the battery holder t from the battery compart-
ment r.
4. Remove the old batteries (if there are any) from the battery
holder t.
5. Insert new batteries as shown in the polarity diagram in
the battery holder
t.
6. Slide the battery holder t back into the battery compart-
ment r. Make sure that the battery holder t is inserted
into the battery compartment r with the contacts entering
first (see Fig. 3 and 4).
IB_353244_SSSES1.5B2_LB6.indb 6 11.01.2021 14:48:51