GB/IE/NI 13
Preparing for use
For first time use, please remove the protective foil
19
from the
name plate
13
of the transmitter and insert your name plate
13
into
the recess on the transmitter.
Replace the protective foil
19
on the transmitter.
Inserting / replacing the batteries
Insert the batteries to provide power to the product before prepar-
ing it for use.
CAUTION! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Receiver:
Remove the battery compartment cover
10
from the back of the product
.
Remove the used batteries, if present.
Insert 2 batteries (1.5 V (direct current), type AA).
Note: Ensure correct polarity. This is indicated in the battery
compartment
9
.
Close the battery compartment
9
.
Transmitter:
Remove the holder
15
and screw
18
from the back of the transmitter.
To Next Page
Loading...
