Silvercrest STV 45 E1 - Fan Maintenance and Cleaning

SilverCrest STV 45 E1
10 - English
8.4 Oscillation
The fan can oscillate horizontally.
• Press the OSC (5) button into the lower MOVE position to start the oscillation.
• Press the OSC (5) button again to stop it. The OSC (5) button is now in the upper STOP
position.
9. Maintenance/cleaning
DANGER! Risk of electric shock!
• Disconnect the fan from the mains before cleaning commences.
• Do not immerse the fan in water.
• Do not allow any water or cleaning agent to enter the fan.
Maintenance work is required if the fan has been damaged; for example, if the device housing is
damaged, liquids or objects have got inside the fan or if the fan has been exposed to rain or moisture.
Maintenance work is also required if the fan does not work properly or has been dropped. If you
notice any smoke or unusual noises or smells, disconnect the fan from the mains immediately. If this
happens, you must stop using the fan until it has been checked by a technician. All maintenance work
should only be carried out by qualified specialists. Never open the housing of the fan.
• Remove coarse dust deposits with a vacuum cleaner.
• Clean the fan using a clean, slightly damp cloth. Never use abrasive liquids during cleaning.
• Use some washing up-liquid on the damp cloth for stubborn stains.
• If required, the protective grille can be cleaned with a soft brush.