13 GB
Airflow modes
Press
22
repeatedly to select the desired
airflow mode:
Press
Mode description
1x
Natural
– constant cycling
through different airflow speeds.
Amending airflow speed: In natural
mode, press
21
repeatedly:
1x Mainly low speed
2x Half low half high speed
3x Mainly high speed
2x
Sleep
– constant cycling through
3 different speed modes (if started
from speed mode 3). The product
decreases the speed mode in
15 minute increments and then stays at
the lowest speed mode.
3x
Soft
– constant soft airflow.
4x
Normal – constant airflow at the
currently selected airflow speed
(from 1 to 6).
NOTE: The normal mode is the
default mode once power is on.
Timer (automatic
switch off time)
When the product is on, press
24
continuously to set the automatic turn off time.
You can choose from 1 to 8 hours.
Cleaning and care
Before cleaning, press
23
and unplug the
product from the power supply to completely
switch off the product. Remove the battery from
the remote control
31
before cleaning.
m WARNING! Do not immerse the electrical
parts of the product in water or other liquids.
Never hold the product under running water.
Clean the product with a slightly moistened
cloth.
Do not allow any water or other liquids enter the
product‘s interior.
Do not use abrasives, harsh cleaning solutions or
hard brushes for cleaning.
Let all parts dry afterwards.
Cleaning the blade and the
safety guard
Dust collections on blade
4
and on the grilles
2
/
6
can be removed with a brush (not
supplied). In case of serious soiling, the front
grille
6
can be removed for thorough cleaning.
To do so, reverse the steps of the “Assembly”
chapter.
Wipe the grilles
2
/
6
and blade
4
with
a damp cloth. For stubborn soiling use a mild
detergent on the cloth. Dry completely before
re-assembling them.
NOTE: The grilles
2
/
6
act as safety guards
to protect the user from touching the blade
4
.
m DANGER! Ensure that the product is switched
off from the supply mains before removing the
guard.
Mount the front grille
6
back onto the product
when cleaning is complete.