Silvercrest SWE 100 A1

Multi-Band Tuner SWE 100 A1
English - 21
Connecting the Headphones
You can connect the supplied headphones SWE 100 A1 to the
headphones connector [17]. While the headphones are plugged
in, the speaker [9] is muted automatically.
Do not use any headphones other than the
supplied SWE 100 A1. Different headphones can
produce harmful sound pressure levels.
Backlight
While the device is powered on or off, press the left side of the
BACKLIGHT button [14] (☼ icon) to turn the backlight on for
approx. 5 seconds.
You can press the right side of the BACKLIGHT button [14] (
icon) to switch the backlight off while it is lighting.
Connecting an External Antenna
The ANT input [18] is used to connect a shortwave wire
antenna. The antenna must feature a 3.5mm jack-type
connector.