48 - English
6. Technical specifi cations
Power supply: 220–240 V~ 50 Hz
Rated power: 2200 W
Rated current: 10 A
Electrical protection class: 1
Capacity: 8 kg
Water pressure: Maximum 1 MPa/minimum 0.1 MPa
Connection to water supply Cold water
Weight (net) 65.2 kg
Ambient temperature 15°C to 25°C
6.1. Product data sheet
Scan the QR Code shown to download the product data sheet or contact the service department
at www.mlap.info/contact to obtain a printed copy of the product data sheet. You will also find
the QR code on the energy label.
7. EU declaration of conformity
MLAP GmbH hereby declares that the product conforms to the following requirements of the Eu-
ropean Union:
• EMC Directive2014/30/EU
• Low Voltage Directive 2014/35/EU
• Ecodesign Directive 2019/2023
• RoHS Directive 2011/65/EU.
8. Spare parts
If you would like to order spare parts, please contact us using the contact form at www.mlap.info/contact.
The washing machine drive belt may only be changed by authorised specialist personnel.
The minimum period for the supply of spare parts for your household washing machine is 10 years.
9. Installation
WARNING!
Risk of electric shock and material damage!
There is a risk of electric shock as well as material damage if the appliance is connected
improperly.
The electricity and water supply should only be connected by a qualified expert.
The following sections will explain the steps necessary to install the washing machine.
Remove the packaging material and all protective film.
To Next Page
Loading...