Silvercrest SWV 300 C1 - Status

SilverCrest SWV 300 C1
English - 227
Reboot Device
The wifi range extender can be rebooted here.
To do so, click on the Reboot button. Confirm the following confirmation prompt with OK to finally
reboot the wifi range extender or click Cancel to cancel the process.
Status
The firmware version used, the operating time since it was last switched on, and the creation date (build
time) of the installed firmware version of the wifi range extender are displayed here. Click on the "Status"
icon to display additional information. Detailed information on the system, WLAN and LAN is then
displayed.