Silvercrest SWV 300 C1 - First Use; Setting Mode

SilverCrest SWV 300 C1
20 - English
Access Point (AP)
This mode can be used, for example, to provide a router without its own wireless network as a "wireless
router". The router must be connected to the wifi range extender via the LAN cable (network cable, see
"Supplied items").
WARNING! Only use the network cable supplied with the device.
First use
Setting mode
Select the desired mode using the mode selector (8). To do so, move the mode selector (8) to the
desired position (Access Point, Repeater or Client).