Silvercrest SWV 300 C1 - Manual Connection to the AP

SilverCrest SWV 300 C1
English - 49
Your end device then automatically connects to your wifi range extender (AP) and applies all of the
settings. You can then access the wifi range extender (AP) wirelessly.
If your end device does not support WPS, you can also manually establish the connection to the wifi
range extender (AP).
Manual connection to the AP
For a manual connection to the wifi range extender (AP), you must find available wireless networks on
your end device. The wifi range extender (AP) is displayed under the specified SSID (wireless name) in
the list of available wireless networks. Then select the corresponding SSID (wireless name) to connect
your end device wirelessly with the wifi range extender (AP). Then enter the network key you assigned.
For further details, please read the operating instructions for your end device.