Silvercrest SWV 300 C1 - Page 53

SilverCrest SWV 300 C1
English - 51
button to connect wirelessly to the wifi range extender. After having pressed the Connect button,
you may have to click the option Connect without configuring the network.
If you use the wifi range extender in Client Mode (mode selector is at "Client"), the
configuration is possible only via the network cable.
After you have established the connection as previously described, open the Internet browser on your
computer. Enter http://repeater.setup in the address line of the Internet browser and confirm the
entry with the Enter button.
The login window of the wifi range extender opens. Select the desired language and enter admin as
the user name and password. Then click on the Submit button.