Silvercrest SWV 300 C1 - WPS Configuration and Status

SilverCrest SWV 300 C1
58 - English
This option should only be used by experienced users. Network settings can be made here. As the
settings have to be customised to your network, they will not be discussed further here. You can obtain
more information via our service hotline (see page 78).
Click on the Apply button to confirm changed settings.
WPS
WPS Enable
WPS is enabled in the original condition of the device. You can enable or disable WPS here. Click on
the Enabled/Disable button to disable WPS. WPS is enabled if the Enabled/Disable button is
green. WPS is disabled if the Disabled/Enable button is grey. Click on the Disabled/Enable
button to enable WPS. Please note that when WPS is disabled, there can be no connection to the
wireless device via WPS. The WPS button (9) on the wifi range extender does not work also.