SilverCrest SWV 733 B1
24 - English
you would like to use a Wi-Fi router without WPS, you must connect the Dual-Band Range
Extender via network cable or Wi-Fi to your computer and configure it.
WPS - The easiest type of configuration
This is the easiest way to configure the Dual-Band Range Extender. First, check whether your Wi-Fi
router supports WPS. To do so, refer to the documentation that came with your wireless router.
1. Press the WPS button (7) on the Dual-Band Range Extender for at least 6 seconds. After you
have released the WPS button (7), the WPS LED (2) flashes rapidly for approx. 2 minutes.
To Next Page
Loading...
