Silvercrest SWV 733 B1 - Quick Setup

SilverCrest SWV 733 B1
52 - English
Quick Setup
The wizard enables simple configuration of your Dual-Band Range Extender. To start the wizard,
click on the Quick Setup button. Now follow the wizard instructions on the screen.
Settings - Status
The information on the wireless network of the Dual-Band Range Extender is shown here.
Depending on the mode set (Repeater or Access Point mode) of the Dual-Band Range Extender,
not all options may be displayed.
WAN type
Displays which mode (Repeater or Access Point) of the Dual-Band Range Extender is set.
Device IP address
The currently used IP address of the Dual-Band Range Extender is shown here.
Gateway
The IP address of the gateway is displayed here.
DNS1
The IP address of the DNS1 server is displayed here.