Silvercrest SWV 733 B1 - WPS - Connect to the Access Point (Router mode); Manual connection to the Access Point

SilverCrest SWV 733 B1
English - 43
Set the checkmark for “I am connected to the extended network.” and then click on the Finish
button. The status page of the configuration menu is now opened. Please note that a connection
to the Dual-Band Range Extender must be established for this purpose. To do so, connect the
Dual-Band Range Extender to your computer via the network cable.
Following the reboot, the Dual-Band Range Extender can be accessed under the host SSID
specified by you and the host password.