Silvercrest Z30412-IT - Page 192

194 GB/MT
(WATT) overload warning.
6. Press the SET button
3
to confirm
your settings. The first digit flashes.
7. Press the SELECT button
6
repeat-
edly until the desired value appears.
8. Repeat steps 6 and 7 to program the
remaining values.
9. Press the SET button
3
to confirm
your settings.
10. Press and hold down the FUNCTION
button
2
for approx. 3 seconds to
save the entered values.
As soon as an overload warning value
is exceeded, the OVERLOAD WARN-
ING display flashes in the LC display
1
and the meter emits an audible alarm sig-
nal.
Note: If the overload warning value is set
to AMP, then the LC display
1
shows the
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 194 25.05.11 12:21