EasyManua.ls Logo

Silverline 752782 - User Manual

Silverline 752782
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Version date: 28.06.17
silverlinetools.com
XXXXXX
752782
FR Pompe submersible à eau propre 250 W
DE Reinwasser-Tauchpumpe, 250 W
ES Bomba sumergible 250 W
IT Pompa per acqua pulita 250 W
NL 250 W schoonwaterpomp
PL Popmpa zanurzeniowa do czystej wody 250 W
DIY 250W Clean Water Pump 5000Ltr / hr
Register online: silverlinetools.com
3
GUARANTEE
YEAR
ANS DE GARANTIE
JAHRE GARANTIE
AÑOS DE GARANTÍA
ANNI DI GARANZIA
JAAR GARANTIE
LATA GWARANCJI
752782_Manual.indd 1 28/06/2017 15:22

Table of Contents

Questions and Answers

  • C
    courtneyloweJul 28, 2025
    What to do if Silverline Water Pump does not start or stops suddenly?
    • L
      Lisa FlynnJul 28, 2025
      If your Silverline Water Pump fails to start or unexpectedly stops, several factors could be at play. First, the motor might have overheated, triggering the thermal overload protection. Immediately disconnect the pump from the power, find out why it overheated, and clean the impeller, ensuring that the water temperature doesn't exceed 35°C. Another cause could be a lack of power, so check the fuses and electrical connections, consulting an electrician if needed. Lastly, dirt particles might be lodged in the suction base, requiring you to clean it.
  • M
    Mitchell TurnerAug 10, 2025
    Why is my Silverline Water Pump running but not pumping water?
    • J
      Jason LeonardAug 10, 2025
      If your Silverline Water Pump is running but not pumping water, first check the output hose for kinks or clogs and ensure it is clean. Air blockages in the suction base could also be the problem; allow up to one minute for the pump to automatically de-aerate via the vent valve, or try switching it off and on again. A clogged impeller can also prevent water delivery, so clean it according to the maintenance instructions. If the impeller is damaged, contact your dealer or an authorized Silverline service center. Also ensure that the water level doesn't fall below the minimum when the pump starts; if it does, submerge the pump deeper.

Summary

Specification

General Safety

Specific Safety Electric Water Pump Safety

Safety precautions specific to the electric water pump operation and use.

Intended Use

Before Use

Attaching the outlet hose

Steps for correctly attaching the outlet hose to the pump for optimal water flow.

Setting up the pump

Guidelines for positioning the pump underwater and connecting the power cable safely.

Adjusting the Float Switch

How to adjust the float switch cable for automatic pump operation.

Submerging & lifting the pump

Electrical connection

Operation

Maintenance

General inspection

Cleaning

Removing obstructions

Storage

Disposal

Troubleshooting

Silverline 752782 Specifications

Weight and Dimensions IconWeight and Dimensions
Weight3500 g