SilverStone EC04-E User Manual

EC04-E
PCI express card with two USB 3.0 external ports
and internal 19pin dual port connector
MANUAL

SilverStone EC04-E Specifications

General

Interface	PCIe Gen2 x1
Chipset	Asmedia ASM1042
External Ports	USB 3.0 x 2
Operating Temperature	0°C to 60°C
Ports	2 x USB 3.0
Compatibility	Windows 10/8/7, Linux

Summary

Introduction to EC04-E

Key Features of EC04-E

EC04-E Technical Specifications

EC04-E Installation Guide

Step 1: Install PCIe Card

Install the EC04-E into the motherboard's PCIe slot.

Step 2: Connect SATA Power

Connect the 15-pin SATA power connector to the card.

Step 3: Connect Internal USB Header

Connect the 19-pin internal USB 3.0 dual port connector.

Step 4: Install USB 3.0 Driver

Install the Renesas Electronics USB 3.0 host controller driver.

Step 5: Verify Host Controller

Confirm the USB 3.0 host controller is in Device Manager.

Step 6: Connect USB 3.0 Devices

Connect USB 3.0 devices and experience high-speed transfer.