SilverStone SST-SDP08 User Manual

SST-SDP08
3.5” to 2.5” bay converter
Special features:
Nickel-coated finish for durable appearance
Compatible with most 2.5” hard drive
Available for 3.5” drive bay
Installation guide
1. Install your 2.5” hard drive into the
extension bracket and secure with
included screws as shown.
1. Setzen Sie die 2,5 Zoll-Festplatte
in das Slotblech ein und fixieren
Sie sie mit den mitgelieferten
Schrauben (s. Abb.).
1. Installare l’hard disk da 2,5” nella
sede preposta, ed assicurarlo al
supporto per mezzo delle viti in
dotazione.
1. Установите ваш 2,5-дюймовый
жесткий диск в переходной
кронштейн и закрепите прилагаемыми
шурупами, как показано на рисунке.
1. 2.5” 䚌☐ ☐⢰㢨⽀⪰ 䞉㣙
GGG⽀⢰䁇㜄 ㉘㾌 䚐䟸, ┍⸽═ ⇌㇠⦐
GGGἬ⫰Ḱ ᵍ㢨 Ḕ㥉㐐䇩⏼␘.
1.āࡂ࡯࠼࠺ࠖࠬࠢ࠼࡜ࠗࡉࠍ
ᢵᔉࡉ࡜ࠤ࠶࠻ߦঢ߼ǃೇߩ
ࠃ߁ߦҬሲߩࡀࠫߢ೎ᅮߒ߹ߔDŽ
1.ᇛᙼⱘয়⹀⹳㺱ܹ䔝᦯
ᶊЁϺձ೪⼎ҹܻ䰘㶎㍆
䥪೎DŽ
1.ᇚᙼⱘয়⹀Ⲭ㺙ܹ䕀ᤶ
ᶊЁᑊձ೒⼎ҹݙ䰘㶎ϱ
䫕೎DŽ
1. Instale su disco duro de 2,5” en el
bracket de expansión y asegúrelo
con los tornillos que se incluyen
como se muestra.
1. Installez votre disque dur 2.5” dans le
casier d’extension et fixez-le avec les
vis incluses comme montré.
ㅔԧЁ᭛
ㅔԧЁ᭛ ㅔԧЁ᭛
NO:G11209670

SilverStone SST-SDP08 Specifications

Storage

internal drive bay size	3.5”
hard drive capacity	2 x 2.5" hard drives

Weight and Dimensions

overall dimensions	101.6 mm (W) x 25.4mm (H) x 146mm (D)
weight	160g
material thickness	1.0 mm

Summary

Special Features

Durable Nickel-Coated Finish

Features a nickel-coated finish for a durable and attractive appearance.

Broad Compatibility

Compatible with most standard 2.5-inch hard drives.

3.5-Inch Bay Fitment

Designed to fit into a standard 3.5-inch drive bay.

Installation Guide

Install 2.5-Inch Drive into Bracket

Install your 2.5-inch hard drive into the extension bracket and secure with provided screws.

Mount Bracket in Drive Bay

Insert the extension bracket into an empty 3.5-inch internal drive bay and secure if necessary.

Specifications

Model and Color

Identifies the product model as SST-SDP08 with a nickel-coated finish.

Material and Application

Constructed from 1.0 mm SPCC with nickel plating for 3.5-inch drive internal bay use.

Capacity and Dimensions

Supports 2 x 2.5-inch hard drives with overall dimensions of 101.6mm x 25.4mm x 146mm.

Weight

The product weighs 160g.