Specifications
Treasure Series
SilverStone TS11-C is an external hard drive docking station made to accommodate 2.5” or 3.5” drive at speeds up to 10Gb/s with its USB 3.1
Gen2 capability and Type-C connector. This plug and play device is easy to setup and with its tray-less design, a user can quickly hot-swap
drives on it in no time. For enthusiasts or professionals requiring even greater performance, the TS11-C is also equipped with UASP
(USB Attached SCSI Protocol) so those with computers that support it can take their data transfer rate up another level.
Model
Material
Chipset
Color
Connector
Data Transfer rate
LED Indicator
Driver interface support
Support Operating system
Environment
Net Weight
Dimension
SST-TS11G-C
Aluminum body with plastic-ABS cover
ASM1351
Gold
USB 3.1 Type-C to Type-A connector
USB 3.1 Gen2 up to 10Gbps (Compatible with USB 3.0 / 2.0 / 1.1)
Power LED: Blue for power on
Red light flashing: Read and write
SATA I / II / III
Microsoft Windows 7 (32bit/64bit)*, 8/8.1/10 (32bit/64bit)** or future release version
Mac OS 10.5*** or above
Operating Temperature: 5°C ~ 35°C
Operating Humidity: 20%RH ~ 80%RH
Storage Temperature: -20°C ~ 50°C
Storage Humidity: 20%RH ~ 80%RH
990g ± 20g
72mm (W) x 55mm (H) x 130mm (D)
* If your OS version is Windows 7 or earlier, please install driver (available from SilverStone website) prior to using the TS11-C.
** Windows 8 or 8.1, 10 supports TS11-C automatically so you do not need to install additional driver for it.
*** User should check for XHCI function in Mac OS, if computer system supports XHCI function then it can support TS11-C automatically
without additional driver installation.
TS11-C
Introduction
1
To Next Page
Loading...