129
OIL X-CHANGE-R SYSTEM
(OPTIONAL)
You may have chosen as an option when
you purchased your 43MY, an OIL X-
CHANGE-R System, manufactured by
Ray Zager & Company and factory in-
stalled at the Silverton plant. The purpose
of the OIL X-CHANGE-R System is to
automatically drain, fill and maintain en-
gine and/or transmission oil with relative
ease and no spilled oil, which is normally
associated with your required periodic oil
changes. The OIL X-CHANGE-R System
consists of an enclosed pump, located in
the engine compartment, which operates
on DC electrical power. The system pump
is controlled by a breaker switch, located
on the AC/DC Electrical Panel and de-
scribed as “Accessory”(Refer to the Elec-
trical Pages in this section of this Owners
Manual for the location of the switch for
the OIL X-CHANGE-R System). Opera-
tion of the system is accomplished by
turning ON the toggle switch located on
the pump unit.
Refer to the OIL X-Change-R Sytem
Manual included with your owner’s packet
for information concerning the operation
and maintenance of this system.
To Next Page
Loading...