SYSTEM OPERATIONS-14
shafts, rudders, etc. and should be com-
pleted as necessary. The anodes may
require more frequent replacement, depend-
ing on your docking location and the length
of your boating season. If possible, check
the anodes for excessive corrosion midway
through your boating season. If excessive
corrosion is noted, have your dealer or a
competent technician replace the sacrifi cial
zinc anodes. Periodically check the continu-
ity of wiring connections to make sure they
are tight and free of corrosion. Tighten and
clean connections as necessary.
NOTE: Silverton recommends placing sac-
rifi cial zinc anodes on the following compo-
nents:
• Propeller shafts
• Rudders
• Trim Tabs
IMPORTANT: DO NOT paint any of the
sacrifi cial zinc anodes as it will retard the
fl ow of electric current through them and
render them ineffective.
To Next Page