Sim2 CRYSTAL4-SH - Page 16

CRYSTAL4-SH
User Guide
16
1
Power Off
Turn Off the projector
2
Power On
Turn On the projector
3
Brightness
Adjust the brightness of the image
4
Gamma
Set up gamma curve type
5
Contrast
Control the degree of difference between the lightest and darkest
parts of the picture
6
Not supported
7
Color Adjustments
[Color Settings]
Configure the color settings
8
Not supported
9
F1
Function button, assignable, default is
“
DigZoomMin
”
10
F2
Function button, assignable, default is
“
DigZoomNone
”
11
F3
Function button, assignable, default is Trigger 12V B (on/off)
12
Aspect
Select the aspect ratio of the displayed image
13
Advanced Image
Processing
[Pure Engine]
A
collection of advanced image processing technologies that
enhances the quality of the displayed image.
15
Display Mode
Select a display mode for optimized settings for different
applications
14,16,17,
18,20
Arrows for Menu
Four directional select keys
–
use these menu arrows to select
items or make adjustments to your selection
19
Menu
Display or exit the on
-
screen display menus for projector
21
Info
View the projector information
22
Light
Turn on the backlight in the
remote control
23
Re
-
Sync
Automatically synchronizes the projector to the input source
24
HDMI 1
Choose source from HDMI 1 connector
25
HDMI 2
Choose source from HDMI 2 (UHD
, HDR and HLG
) connector
26
Not supported
27
Not supported
24
VGA/
YPbPr
Choose source from VGA connector (RGB or YPbPr)